Reference Guide

ManualsBrandsDell ManualsAccess PlatformsBrocade G620

1051

1032 Brocade Fabric OS Command Reference

53-1004112-02

snmpConfig

BD-MIB: YES

BROCADE-MAPS-MIB: YES

T11-FC-ZONE-SERVER-MIB: NO

SW-TRAP: YES

swFCPortScn: YES

swEventTrap: YES

DesiredSeverity:None

swIPv6ChangeTrap: YES

DesiredSeverity:None

swPmgrEventTrap: YES

swFabricReconfigTrap: YES

swFabricSegmentTrap: YES

swExtTrap: NO

swStateChangeTrap: NO

swPortMoveTrap: NO

swBrcdGenericTrap: YES

swDeviceStatusTrap: YES

swZoneConfigChangeTrap: NO

FA-TRAP: YES

connUnitStatusChange: YES

connUnitEventTrap: YES

connUnitPortStatusChange: YES

FICON-TRAP: YES

linkRNIDDeviceRegistration: YES

linkRNIDDeviceDeRegistration: YES

linkLIRRListenerAdded: YES

linkLIRRListenerRemoved: YES

linkRLIRFailureIncident: YES

HA-TRAP: YES

fruStatusChanged: YES

cpStatusChanged: YES

fruHistoryTrap: YES

IF-TRAP: YES

linkDown: YES

linkUp: YES

BD-TRAP: YES

bdTrap: YES

bdClearTrap: YES

MAPS-TRAP: YES

mapsTrapAM: YES

T11-FC-ZONE-SERVER-TRAP: NO

t11ZsRequestRejectNotify: NO

t11ZsMergeFailureNotify: NO

t11ZsMergeSuccessNotify: NO

t11ZsDefZoneChangeNotify: NO

t11ZsActivateNotify: NO

Note: The Zone Mib parameters are for restricted usage only.

To set the access control configuration noninteractively:

switch:admin> snmpconfig --set accesscontrol -index 1 -host 2.3.4.5 -access ro

Committing configuration...done.