Reference Guide

Brocade Fabric OS Command Reference 1035
53-1004112-02
snmpConfig
SNMPv3 trap/inform recipient configuration:
Notify Type [TRAP(1)/INFORM(2)]:(1..2)[1] 2
Inform Recipient's IP address : [0.0.0.0] 10.70.12.115
UserIndex: (1..6) [1]
Inform recipient Severity level : (0..5) [0] 5
Inform recipient Port : (0..65535) [162]
Notify Type [TRAP(1)/INFORM(2)]:(1..2)[1] 2
Inform Recipient's IP address : [0.0.0.0] 1.2.3.4
UserIndex: (1..6) [2]
Informs recipient Severity level : (0..5) [0] 2
Informs recipient Port : (0..65535) [162]
Notify Type [TRAP(1)/INFORM(2)]:(1..2)[1]
Trap Recipient's IP address : [0.0.0.0]
Notify Type [TRAP(1)/INFORM(2)]:(1..2)[1]
Trap Recipient's IP address : [0.0.0.0]
Notify Type [TRAP(1)/INFORM(2)]:(1..2)[1] 1
Trap Recipient's IP address : [0.0.0.0] 10.70.4.106
UserIndex: (1..6) [5]
Trap recipient Severity level : (0..5) [0] 2
Trap recipient Port : (0..65535) [162]
Notify Type [TRAP(1)/INFORM(2)]:(1..2)[1]
Trap Recipient's IP address : [0.0.0.0]
Committing configuration.....done.
To block access to SNMPv1/2c
switch:admin> snmpconfig --disable snmpv1
switch:admin> snmpconfig --show
SNMPv1 community and trap recipient configuration:
Community 1: ram (rw)
Trap recipient: 172.26.4.84
Trap port: 162
Trap recipient Severity level: 5
Community 2: OrigEquipMfr (rw)
No trap recipient configured yet
Community 3: private (rw)
No trap recipient configured yet
Community 4: public (ro)
No trap recipient configured yet
SNMPv1:Disabled
References Refer to the following publications for further information on SNMP:
• SW_v5_x.mib, "Switch Management Information & Switch Enterprise Specific Trap"
• RFC1157, "A Simple Network Management Protocol (SNMPv1)"
• RFC1213, "Management information Base for Network Management of TCP/IP-based internets: MIB-II"
• RFC2574, "User-based Security Model (USM) for version 3 of the Simple Network Management Protocol
(SNMPv3)"
SEE ALSO None