Reference Guide

Brocade Fabric OS Command Reference 1037
53-1004112-02
snmpTraps
--show [port]
Displays all configured SNMP traps and MIBs. When used with the optional port argument,
this command displays the ports that are blocked from receiving certain software traps.
--help
Displays the command usage.
Examples To send all traps to the configured recipients:
switch:admin> snmpTraps --send
Number of traps sent : 27
To send a FRU history trap to recipient 172.16.0.12
switch:admin> snmptraps --send -trap_name \
fru-history-trap -ip_address 172.16.0.12.
Number of traps sent : 1
To display the traps and MIBs supported in Fabric OS:
switch:admin> snmpTraps --show
# |Mib Name |Supported Traps
---|----------------|--------------------------------
001|SW-MIB |sw-fc-port-scn
| |sw-ip-v6-change-trap
| |sw-pmgr-event-trap
| |sw-event-trap
| |sw-fabric-reconfig-trap
| |sw-fabric-segment-trap
| |sw-state-trap
| |sw-zone-config-change-trap
| |sw-port-move-trap
| |sw-brcd-genric-trap
| |sw-device-status-trap
002|FICON-MIB |link-rnid-device-registration
| |link-rnid-device-deregistration
| |link-lirr-listerner-added
| |link-lirr-listerner-removed
| |link-rlir-failure-incident
003|FA-MIB |conn-unit-status-change
| |conn-unit-sensor-status-change
| |conn-unit-port-status-change
| |conn-unit-event-trap
004|RFC1157 |cold-restart-trap
| |warm-restart-trap
| |if-link-up-trap
| |if-link-down-trap
| |snmp-authetication-trap
005|HA-MIB |fru-status-change-trap
| |fru-history-trap
| |cp-status-change-trap
006|T11-FC-ZONE-SERVER-MIB |t11ZsRequestRejectNotify
| |t11ZsMergeSuccessNotify
| |t11ZsMergeFailureNotify
| |t11ZsDefZoneChangeNotify
| |t11ZsActivateNotify