Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsBrocade G620
1081108210831084108510861087108810891090
1062 Brocade Fabric OS Command Reference
53-1004112-02
supportShowCfgDisable
supportShowCfgDisable
Disables a group of commands under the supportShow command.
Synopsis supportshowcfgdisable os | exception | port | fabric
| services | security | network | portlog | system | extend
| filter | ficon | iswitch | asic_db | ag
| dce_hsl | crypto | fcip
Description Use this command to disable a group of commands under the supportShow command. Use the
supportShowCfgEnable command to enable groups of commands.
The FCIP commands are supported only on the Brocade FX8-24 platform and cannot be configured to collect
data on unsupported platforms.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
os
Disables the OS group commands.
exception
Disables the exception group commands.
port
Disables the port group commands.
fabric
Disables the fabric group commands.
services
Disables the service group commands.
security
Disables the security group commands.
network
Disables the network group commands.
portlog
Disables the portlog group commands.
system
Disables the system group commands.
extend
Disables the extend group commands.
filter
Disables the filter group commands.
ficon
Disables the FICON group commands.