Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsBrocade G620
1081108210831084108510861087108810891090
1064 Brocade Fabric OS Command Reference
53-1004112-02
supportShowCfgEnable
supportShowCfgEnable
Enables a group of commands to be displayed under the supportShow command.
Synopsis supportshowcfgenable os | exception | port | fabric
| services | security | network | portlog | system
| extend | filter | ficon | iswitch | asic_db
| ag | dce_hsl |crypto | fcip
Description Use this command to enable a group of commands to be displayed under the supportShow command. Use the
supportShowCfgDisable command to disable groups of commands.
The FCIP commands are supported only on the Brocade FX8-24 platform and cannot be configured to collect
data on unsupported platforms.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
os
Enables the OS group commands.
exception
Enables the exception group commands.
port
Enables the port group commands.
fabric
Enables the fabric group commands.
services
Enables the service group commands.
security
Enables the security group commands.
network
Enables the network group commands.
portlog
Enables the portlog group commands.
system
Enables the system group commands.
extend
Enables the extend group commands.
filter
Enables the filter group commands.
ficon
Enables the FICON group commands.