Reference Guide

ManualsBrandsDell ManualsAccess PlatformsBrocade G620

1081

1066 Brocade Fabric OS Command Reference

53-1004112-02

supportShowCfgShow

Displays the groups of commands enabled for display by the supportShow command.

Synopsis supportshowcfgshow

Description Use this command to display the groups of commands enabled for display by the supportShow command. Use

the supportShowCfgEnable and the supportShowCfgDisable commands to modify which groups are displayed.

The FCIP commands are supported only on the Brocade FX8-24 platform and cannot be configured to collect or

display data on unsupported platforms.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands None

Examples To display command groups configured for data collection on the Brocade 6510:

switch:admin> supportshowcfgshow

os enabled

exception enabled

port enabled

fabric enabled

services enabled

security enabled

network enabled

portlog enabled

system enabled

extend disabled

filter disabled

ficon disabled

iswitch disabled

asic_db enabled

fcip disabled (not applicable to this platform)

ag disabled

To display command groups configured for data collection on the Brocade 7800