Reference Guide

Brocade Fabric OS Command Reference 1075

53-1004112-02

switchDisable

Disables all user ports on a switch.

Synopsis switchdisable

Description Use this command to disable all user ports on a switch. All Fibre Channel ports are taken offline. If the switch was

part of a fabric, the remaining switches reconfigure. As each port is disabled, the front panel LED changes to a

slow-flashing amber.

The switch must be disabled before making configuration changes or before running offline diagnostic tests.

Commands that require the switch to be disabled generate an error message if invoked while the switch is enabled.

It is not necessary to disable the switch before rebooting or powering off.

When this command is executed on a logical switch, only the ports allocated to the logical are disabled. To disable

the entire chassis, use the chassisDisable command.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands None

Examples To disable the switch:

switch:admin> switchdisable

SEE ALSO bladeEnable, bladeDisable, chassisEnable, chassisDisable, switchCfgPersistentDisable,

switchCfgPersistentEnable, switchEnable, switchShow