Reference Guide

Brocade Fabric OS Command Reference 1079
53-1004112-02
switchShow
switchShow
Displays switch and port status.
Synopsis switchshow
switchshow [-slot slot] [-portname | -qsfp]
switchshow [-portcount]
Description Use this command to display switch, blade, and port status information. Output may vary depending on the switch
model.
When used without operands, switchShow displays the following information:
switchName
Switch name.
switchType
Switch model and revision numbers.
switchState
Switch state: Online, Offline, Testing, or Faulty. When you issue the
switchcfgPersistentDisable command followed by the switchEnable command, the switch
state changes to, "Online (Temporary)". The switch remains in this state until you issue the
switchcfgPersistentEnable command.
switchMode
Switch operation mode: Access Gateway (if AG is enabled).
switchRole
Switch role: Principal, Subordinate, or Disabled.
switchDomain
Switch domain ID: 1 to 239.
switchId
Switch embedded port D_ID.
switchWwn
Switch world wide name (WWN).
switchBeacon
Switch beaconing state: On or Off.
zoning
The name of the active zone is displayed in parentheses. Active only when Access Gateway
mode is disabled.
FC Router
FC Router state: On or Off.
FC Router BB Fabric ID
The backbone fabric ID for FC routing.