Reference Guide

Brocade Fabric OS Command Reference 1085
53-1004112-02
switchShow
(downstream)
The E_Port is a downstream path away from the principal switch of the fabric.
FICON Persistent DID
This port has been disabled, because the switch could not obtain its configuration domain
ID during the fabric reconfiguration when fmsmode was enabled. See the ficonCupSet help
page for more information.
Fabric ID conflict
Two different fabrics have been assigned the same fabric ID. Applicable only to EX_Ports
and Logical Fabric environments.
Fabric ID oversubscribed
One fabric has been assigned two different fabric IDs (EX_Ports only).
AoQ
Application-oriented QoS; indicates that an F_Port or N_Port has negotiated a link that is
capable of quality of service (QoS). Both sides of the link have QoS capability and agreed
on the protocol. The link could be between an HBA and an Access Gateway, between an
Access Gateway and an edge switch, or between an HBA and an edge switch.
LB mode
If the Access Gateway cannot negotiate QoS capabilities with the edge switch, an HBA
connected to the Access Gateway will not be able to negotiate a QoS link with the Access
Gateway.
(logical)
Indicates a logical port. The switchShow output shows all logical ports currently present in
the logical switch. The command displays -1 for the slot for logical ports and the user port
number for slot port. The logical port numbers are not persistent and may change when the
logical interswitch links (LISLs) are deleted and recreated. A logical port is shown to be in
one of the following states: E_Port (if the port is online), offline, or disabled. When the port is
disabled, a reason is provided.
segmented
Indicates a segmented or disabled port along with one of the following segmentation
reasons:
(Encrypt incompatible)
Port segmentation or port disable due to mismatched configurations.
(Compress incompatible)
Port segmentation or port disable due to mismatched configurations.
(Encrypt limitation)
Port segmentation or port disable due to reaching encryption limitations.
(Compress limitation)
Port segmentation or port disable due to reaching compression limitations.
(Authentication failure)
Port segmentation or port disable due to authentication failure.
(Defzone conflict)
Port segmentation due to defzone states.