Reference Guide

Brocade Fabric OS Command Reference 1087
53-1004112-02
switchShow
-portname
Displays the name for each port on the switch. The port name is set by the portName
command.
-qsfp
Displays the output of the switchShow command with a QSFP column added. If a QSFP is
installed on the port, the QSFP number is displayed for the port. This number corresponds
to the physical QSFP number that can be found on the front of each Core Blade. A double
dash (--) indicates that QSFP is not supported on that blade.
-portcount
Displays the number of ports on the switch. This operand is exclusive.
Examples To display the port count:
switch:admin> switchshow -portcount
FC ports = 198, GE ports = 12
To display a QoS-capable Core Access Gateway with online AoQ F_Ports and N_Ports:
switch:admin> switchshow
switchName: Spirit_125
switchType: 66.1
switchState: Online
switchMode: Access Gateway Mode
switchWwn: 10:00:00:05:1e:85:95:d0
switchBeacon: OFF
FC Router: OFF
FC Router BB Fabric ID: 1
Area Port Media Speed State Proto
=====================================
0 0 -- N8 No_Module FC
1 1 -- N8 No_Module FC
2 2 -- N8 No_Module FC
3 3 -- N8 No_Module FC
4 4 -- N8 No_Module FC
5 5 -- N8 No_Module FC
6 6 -- N8 No_Module FC
7 7 -- N8 No_Module FC
8 8 -- N8 No_Module FC
9 9 id N8 Online FC F-Port \
10:00:00:05:1e:53:2c:54 0x690105 (AoQ)
10 10 id N8 Online FC F-Port \
10:00:00:05:1e:56:5f:a9 0x690107 (AoQ)
11 11 id N4 Online FC F-Port \
10:00:00:05:1e:56:5f:a8 0x690106 (AoQ)
12 12 -- N8 No_Module FC
13 13 -- N8 No_Module FC
14 14 -- N8 No_Module FC
15 15 -- N8 No_Module FC
16 16 id N8 No_Light FC
17 17 id N8 Online FC F-Port \
1 N Port + 3 NPIV public (AoQ)
18 18 -- N8 No_Module FC
19 19 -- N8 No_Module FC
20 20 -- N8 No_Module FC
21 21 -- N8 No_Module FC