Reference Guide

1098 Brocade Fabric OS Command Reference

53-1004112-02

switchViolation

Dumps the DCC violations for a switch.

Synopsis switchViolation --dump -dcc

Description Use this command to display all Device Connection Control (DCC) violations that have occurred on a switch.

Internally the command searches "errdumpall" for the DCC violations. For each DCC violation, the command

displays the device WWN and the port where the violation occurred.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

This command can be executed on both active and standby CPs. This command does not support High

Availability (HA).

Operands This command has the following operands. If executed without operands, the command prints the usage.

--dump

Displays specified policy violation.

-dcc

Specifies the violation type as DCC.

Examples To display DCC violations for a switch:

switch:admin> switchviolation --dump -dcc

Device WWN Port

-----------------------------------

22:00:00:04:cf:75:59:87 10