Reference Guide

1122 Brocade Fabric OS Command Reference
53-1004112-02
tsTimeZone
Operands
This command has the following operands:
--old
Specifies the time zone in the offset format.
hourOffset
Specifies the number of hours relative to GMT. This operand must be specified as an
integer. Valid values are -12 to 12. This operand is required with the --old option.
minuteOffset
Specifies the number of minutes relative to hour offset. This operand must be specified as
an integer and is valid only with the --old option. Valid values are -30, 0, or 30. This
operand is optional; if not specified, the value defaults to 0.
timezonename
Specifies the name of a time zone from the time zone database. Use tstimezone
--interactive for a listing of valid time zone name.
--interactive
Interactively sets the timezone in name format.
Examples To display the current time zone setup and then change it to GMT-3:30:
switch:admin> tstimezone
Time Zone Hour Offset: 0
Time Zone Minute Offset: 0
switch:admin> tstimezone -3, -30
Updating Time Zone configuration...done.
System Time Zone change will take effect at next reboot.
switch:admin> tstimezone
Time Zone Hour Offset: -3
Time Zone Minute Offset: -30
To set the current timezone to the zone to Pacific Time using the interactive command mode:
switch:admin> tsTimeZone --interactive
Please identify a location so that time zone rules can be set correctly.
Please select a continent or ocean.
1) Africa
2) Americas
3) Antarctica
4) Arctic Ocean
5) Asia
6) Atlantic Ocean
7) Australia
8) Europe
9) Indian Ocean
10) Pacific Ocean
11) none - I want to specify the time zone using the POSIX TZ format.
Enter number or control-D to quit ?2
Please select a country.
1) Anguilla 28) Haiti
2) Antigua & Barbuda 29) Honduras
3) Argentina 30) Jamaica
4) Aruba 31) Martinique
5) Bahamas 32) Mexico