Reference Guide

Brocade Fabric OS Command Reference 91

53-1004112-02

cfgDelete

Deletes a zone configuration.

Synopsis cfgdelete "cfgName"

Description Use this command to delete a zone configuration.

This command changes the Defined Configuration (see cfgShow). For the change to become effective, enable the

configuration with the cfgEnable command. For the change to be preserved across switch reboots, save the

configuration to nonvolatile memory with the cfgSave command.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

When an FCS policy is enabled, this command can be issued only from the primary FCS switch.

Operands The following operand is required:

"cfgName"

Specify a name for the zone configuration to be deleted. The name must be enclosed in

double quotation marks.

Examples To delete a zone configuration:

switch:admin> cfgdelete "USA_cfg"

SEE ALSO cfgAdd, cfgClear, cfgCreate, cfgDisable, cfgEnable, cfgRemove, cfgSave, cfgShow