Reference Guide

Brocade Fabric OS Command Reference 1129
53-1004112-02
uRouteShow
Notes
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
slot
For bladed systems only, specify the slot number of the input port whose routes are
displayed, followed by a slash (/).
port
Specify the number of the input port whose routes are to be displayed, relative to its slot for
bladed systems. Use switchShow to display a list of valid ports. This operand is optional; if
omitted, the command displays routing information for all input ports in the switch.
domain
Specify a remote domain in the fabric for which routing information is to be displayed. This
operand is optional; if omitted, the routing information for all domains in the fabric is
displayed.
Examples To display the routing information of all the active ports:
switch:admin> urouteshow
Local Domain ID: 3
In Port Domain Out Port Metric Hops Flags Next (Dom, Port)
----------------------------------------------------------
0 1 11 1000 1 D 1,0
Type <CR> to continue, Q<CR> to stop:
11 2 0 1500 2 D 4,0
Type <CR> to continue, Q<CR> to stop:
4 0 500 1 D 4,0
16 1 27 1000 1 D 1,1
Type <CR> to continue, Q<CR> to stop:
27 2 16 1500 2 D 4,16
To display the routing information of port 11 to domain 4 only:
switch:admin> urouteshow 1/11, 4
Local Domain ID: 3
In Port Domain Out Port Metric Hops Flags Next (Dom, Port)
---------- ------------------------------------------------
11 4 16 500 1 D 4,16
SEE ALSO portRouteShow, topologyShow