Reference Guide

Brocade Fabric OS Command Reference 1157
53-1004112-02
zone
To create an FCR TI zone within an Edge fabric where a host should talk to target1 and target4 through port
number 2 on an Edge fabric switch with a domain ID of 3. (in the example, "3,1" is the host, and the remaining
members are E_Ports):
switch:admin> zone --create -t ti fcr_edge_ti_zone \
-p "3,1; 3,2; 4,-1; 5, -1"
To create an FCR TI zone within a Backbone where a host, target1, and target4 communicate over VE_Ports
consisting of FCR1 port number 4 and FCR2 port number 7:
switch:admin> zone --create -t ti fcr_ti_zone \
-p "1,1; 2,1;host_PWWN; target1_PWWN; \
target4_PWWN; 1,4; 2,7"
To troubleshoot TI zone problems:
switch:admin> zone --showTIerrors
My Domain: 1
Error type: ERROR
Affected Remote Domain: 2
Affected Local Port: 3
Affected TI Zones: ti1, ti2
Affected Remote Ports: 6, 7, 8, 9
To display details of the trunk members present in the TI zone and those not present in the TI zone:
switch:admin> zone --showTItrunkerrors
TI Zone Name: brackets
E-Port Trunks
Trunk members in TI zone: 16 18
Trunk members not in TI zone: 17
F-Port Trunks
Trunk members in TI zone: 4 5
Trunk members not in TI zone: 6
TI Zone Name: loop
E-Port Trunks
Trunk members in TI zone: 0
Trunk members not in TI zone: 1
TI Zone Name: operand
E-Port Trunks
Trunk members in TI zone: 8
Trunk members not in TI zone: 9 10
E-Port Trunks
Trunk members in TI zone: 16
Trunk members not in TI zone: 17 18