Reference Guide

Brocade Fabric OS Command Reference 135

53-1004112-02

configRemove

Deletes a saved configuration file.

Synopsis configremove -local | -USB | -U [file]

Description This command deletes a configuration file that was previously saved to the local chassis or to an attached USB

device by using the configUpload command.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands This command has the following operands:

-local

Removes a configuration file that was previously created by configUpload -local from the

local chassis.

-USB | -U

Removes a configuration file that was previously created by configUpload -USB from an

attached USB device.

file

Specifies the configuration file to be removed. If the file option is omitted, the command

prompts for a file name.

Examples To remove a configuration file from the local chassis:

switch:admin> configremove -local first_config.txt

To remove a configuration file from an attached USB device without specifying a filename:

switch:admin> configremove -USB

File Name [config.txt]: second_config.txt

SEE ALSO configDownload, configUpload, configList, configShow