Reference Guide

Brocade Fabric OS Command Reference 137
53-1004112-02
configShow
-local [file]
Displays the content of a configuration file that was previously created by configUpload and
stored on the chassis. The output can be optionally filtered by -pattern "pattern". If file is
omitted, the command prompts for a file name. The output format when -local is specified
matches that of configUpload and contains a superset of the information provided when
-local is not specified.
-USB | -U [file]
Displays the content of a configuration file that was previously created by configUpload and
stored on an attached USB device. The output can be optionally filtered by -pattern
"pattern". If file is omitted, the command prompts for a file name. The output format when
-USB is specified matches that of configUpload and contains a superset of the information
provided when -USB is not specified.
Examples To display all configuration data on a Virtual Fabric-enabled system:
switch :admin> configshow -all
[Configuration upload Information]
Configuration Format = 3.0
Minimum Compatible Format = 3.0
Excluding Format = 0.0
date = Sun May 26 06:18:40 2013
FOS version = v7.2.0
Number of LS = 2
[Chassis Configuration Begin]
[fcRouting]
fcRoute.backboneFabricId:100
fcRoute.fcrState:2
fcRouteParam.maxLsanCount:3000
fcRoute.port.8.xportAdmin:DISABLED
fcRoute.port.8.fabricId:4
fcRoute.port.8.ratov:10000
fcRoute.port.8.edtov:2000
fcRoute.port.8.frontConfigDid:160
fcRoute.port.8.portType:400
fcRoute.port.8.portMode:0
fcRoute.port.8.autoElp:7
fcRoute.port.9.xportAdmin:DISABLED
fcRoute.port.9.fabricId:5
fcRoute.port.9.ratov:10000
fcRoute.port.9.edtov:2000
fcRoute.port.9.frontConfigDid:160
fcRoute.port.9.portType:400
fcRoute.port.9.portMode:0
fcRoute.port.9.autoElp:7
fcRouteParam.port.8.rportCost:0
fcRouteParam.port.9.rportCost:0
fcRoute.xlate.persistxdState:1
fcRouteParam.lsan.tagCnt:0
[Chassis Configuration]
passwdcfg.minlength:8
passwdcfg.lowercase:0
passwdcfg.uppercase:0
passwdcfg.digits:0
passwdcfg.punctuation:0