Reference Guide

ManualsBrandsDell ManualsAccess PlatformsBrocade G620

171

172

173

174

175

176

177

178

179

180

152 Brocade Fabric OS Command Reference

53-1004112-02

configure

The values for virtual channel settings are as follows:

Field Default Range

____________________________________

VC Priority 2 2 2 to 3

VC Priority 3 2 2 to 3

VC Priority 4 2 2 to 3

VC Priority 5 2 2 to 3

VC Priority 6 3 2 to 3

VC Priority 7 3 2 to 3

F_Port Login Parameters

Specifies the F_Port login parameters. The following F_Port login settings are configurable. Unless there are

issues with F_Port staging, do not change default values. (* = multiplication symbol)

Field Type Default Range

________________________________________________________________

Maximum logins Number For directors: 1 to

per switch 16 * the max number 126 * the max

of physical ports

Logins per second Number 0 0 to 100

(milli-seconds) Number 0 0 to 10000

Stage FDISC logins

with busy rejects: Number 0 1 to 255

Enforce FLOGI/FDISC

MAX num. of FLOGIs

allowed Number 100 0 to 100

Maximum logins per switch

Sets a switch-wide limit on allowed logins.

The following three parameters are related to staged F_Port logins by FLOGI requests and virtual device logins by

FDISC(SID==0) requests.

Logins per second

Specifies the number of logins the switch accepts per second in staged F_Port bring up.

Specifies the stage interval in staged F_Port bring up.

Stage FDISC logins with busy reject:

This parameter, if nonzero, enables staging of FDISC logins by rejecting the FDISC

requests with "logical busy", when the requests are more than the number of configured

"logins per second". It also specifies the number of FDISC requests that will always be

accepted first without reject.

Enforce FLOGI/FDISC login

Setting this flag allows a second F_Port login (FLOGI/FDISC login) in the event of two

devices attempting to log in with the same PWWN. In default mode (zero) the first

FLOGI/FDISC login takes precedence over the second. When the mode is set to 1, the

second FLOGI/FDISC login takes precedence over the first. All modes are for NPIV and