Reference Guide

Brocade Fabric OS Command Reference 157
53-1004112-02
configureChassis
configureChassis
Changes chassis-level system configuration settings.
Synopsis configurechassis
Description Use this command to modify chassis-level system configuration settings.
Configuration data is grouped into chassis information and switch information. Each configuration type is managed
separately.
Use the configure command to modify switch configuration parameters. Use the configureChassis command to
modify the following chassis configuration parameters:
• Cfgload attributes
• Custom Attributes
• System settings
• fos attributes
This command requires chassis permissions in both Virtual Fabric and non-Virtual Fabric environments.
The configureChassis command interactively presents a hierarchical menu. Each top-level heading and its
associated subheadings consist of a text prompt, a selection of valid values, and a default value (in brackets).
The following keys control the execution of the command:
Return
When entered at a prompt with no preceding input, the command accepts the default value
(if applicable) and moves to the next prompt.
Interrupt (Ctrl-C)
Aborts the command immediately and ignores all changes made.
End-of-file (Ctrl-D)
When entered at a prompt with no preceding input, terminates the command and saves
changes made.
The following parameters can be modified with the configureChassis command:
Cfgload Attributes
Configures configuration upload and download parameters.
Enforce secure Config Upload/Download
Enables (yes) or disables (no) secure configuration upload or download. The default value is
"no.
Add Suffix to the uploaded file name
Appends a suffix to the uploaded configuration file. The suffix includes the chassis name
and a time stamp in the yyymmdd_hhmmss format. Refer to the example section for an
illustration. This feature is disabled by default.
Do you want to enable auto firmwaresync
Enables the firmware from the active CP to synchronize automatically to the standby CP.