Reference Guide

178 Brocade Fabric OS Command Reference
53-1004112-02
diagShow
diagShow
Displays diagnostics status.
Synopsis diagshow
[--slot number]
[-post]
[-port number]
[-use_bports value]
Description Use this command to display the diagnostics status for the specified list of ports.
Notes You cannot interrupt the test by pressing the return key (<cr>).
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following optional operands:
--slot number
Specify which slot to operate on. If this option is not specified, the default slot 0 is used. The
default slot is designed to operate on fixed-port-count products. By default, this command
displays information for all user ports in the system. Default slot 0 is not valid in a chassis
system.
-post
Displays the status of the last run power-on self-test (POST) on the specified slot. This
operand is supported only on 32 Gbps-capable platforms.
-port number
Displays status of the specified user slot. This is the default behavior if the -post option is
not specified.
-use_bports value
If this value is nonzero, this command displays the diagnostics status for the blade ports
specified in -use_bports; otherwise, the command displays information for the user ports
specified in -uports. The default value is 0.
Examples To display diagnostic status on a switch blade:
switch:admin> diagshow
Slot# Switch Type ID Status Rev# Blade Post Status
0 Fixed Configuration Switch 171 ENABLED 2.0 FX8-24 POST PASSED
(output truncated)
SEE ALSO itemList