Reference Guide

Brocade Fabric OS Command Reference 187
53-1004112-02
dlsSet
To attempt to enable Lossless while XISL use is enabled:
switch:admin> dlsset --enable -lossless
Lossless option cannot be enabled when XISL use is allowed.
Please disable the switch with 'switchdisable' and run \
'configure' to disallow XISL use before enabling Lossless.
To enable the E_Port Balance Priority:
switch:admin> dlsset --enable -eportbal
E-port Balance Priority is set
To disable the E_Port Balance Priority:
switch:admin> dlsset --disable -eportbal
E-port Balance Priority is not set
To rebalance the E_Port load on a switch:
switch:admin> dlsset --rebalance
Route rebalance successful
To rebalance the E_Port load on all switches:
switch:admin> dlsset --rebalance -all
Route rebalance all successful
SEE ALSO aptPolicy, dlsReset, dlsShow, iodReset, iodSet, iodShow, uRouteShow, topologyShow