Reference Guide

Brocade Fabric OS Command Reference 193
53-1004112-02
errClear
errClear
Clears all error log messages for all switch instances on this Control Processor (CP).
Synopsis errclear
Description Use this command to clear all internal and external error log messages for all switch instances on the CP where the
command is executed. For products with a single processor, all error log messages are cleared. For products that
contain multiple processors, this command can be executed on either control processor. It clears the error log only
on the CP where the command is executed. For example, to clear the error log on the standby CP, issue errclear
on the standby CP.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands None
Examples To clear the error log messages:
switch:admin> errclear
SEE ALSO errDump, errShow