Reference Guide

Brocade Fabric OS Command Reference 195
53-1004112-02
errDump
errDump
Displays the error log without pagination.
Synopsis errdump [--all]
errdump [--count number]
errdump [--reverse]
errdump [--severity severity]
errdump [--slot slotnum]
errdump [--attribute attribute]
errdump [--message msgID]
errdump [--start YYYY/MM/DD-HH:MM:SS]
errdump [--stop YYYY/MM/DD-HH:MM:SS]
errdump [--help]
Description Use this command to dump external error log messages without any page breaks. When executed without
operands, this command prints all error messages for the logical switch context in which the command is executed.
The output of this command is unique for each control processor (CP). On dual CP systems this command must
be executed on each CP to obtain a complete record.
Specify both --start and --stop operands to display messages within a time period. Specify the --start operand
alone to display messages from a specific time to the end of the log. Specify the --stop operand alone to display
messages from the beginning of the log to the specified time.
The following information is displayed in each message:
Start delimiter
Delimiter string for the start of a message.
Timestamp
Timestamp for the message.
Message ID
Message identifier.
External sequence number
Sequence number for the message.
Security audit flag
Security audit message displayed as AUDIT.
Severity
Severity of the message. Valid values include INFO, WARNING, ERROR, and CRITICAL.