Reference Guide

200 Brocade Fabric OS Command Reference

53-1004112-02

errFilterSet

Sets a filter for an error log destination.

Synopsis errfilterset [-d destination][-v severity]

Description Use this command to set a filter for an error log destination. A filter is set based on the severity level of the

messages.

When used without operands, this command displays the filters that are currently in configured.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands This command has the following operands:

-d destination

Specifies the destination for the filter. The string console is the only valid value at this time.

-v severity

Specifies the minimum severity level of the message to pass through the filter. Valid values

are INFO, WARNING, ERROR, or CRITICAL. Input values are not case-sensitive.

Examples To display the current filter settings:

switch:admin> errfilterset

console: filter severity = WARNING

To set the filter severity level for the console:

switch:admin> errfilterset -d console -v warning