Reference Guide

204 Brocade Fabric OS Command Reference
53-1004112-02
errShow
To display messages from specified time to the end of the log:
switch:admin> errshow -t 2016/10/31-19:17:23
Fabric OS: v8.0.0
2015/10/31-19:17:25, [IPAD-1000], 15, CHASSIS, INFO, Brocade5300, \
SW/0 Ether/0 IPv6 autoconf 2012::90/64 DHCP Off.
Type <CR> to continue, Q<CR> to stop:
2015/10/31-19:17:25, [HAM-1004], 16, CHASSIS, INFO, Brocade5300, \
Processor rebooted - Hareboot.
Type <CR> to continue, Q<CR> to stop:
2015/10/31-19:17:29, [FV-1001], 17, CHASSIS, INFO, switch, \
Flow Vision daemon initialized.
Type <CR> to continue, Q<CR> to stop:
To display messages from beginning of the log to the specified time:
switch:admin> errshow -o 2015/10/31-19:01:05
Fabric OS: v8.0.1
2015/10/31-18:59:52, [LOG-1003], 1, CHASSIS, INFO, Brocade5300, \
The log has been cleared.
Type <CR> to continue, Q<CR> to stop:
2015/10/31-19:00:09, [SEC-1203], 2, FID 128, INFO, switch, \
Login information: Login successful via TELNET/SSH/RSH. IP Addr: 10.70.12.103
Type <CR> to continue, Q<CR> to stop:
2015/10/31-19:00:10, [SEC-1203], 3, FID 128, INFO, switch, \
Login information: Login successful via TELNET/SSH/RSH. IP Addr: 10.70.12.103
Type <CR> to continue, Q<CR> to stop:
2015/10/31-19:00:16, [RAS-1007], 4, CHASSIS, INFO, Brocade5300, \
System is about to reload.
Type <CR> to continue, Q<CR> to stop:
To display messages within a time period:
switch:admin> errshow -t 2015/10/31-19:01:06 -o 2015/10/31-19:01:11
Fabric OS: v8.0.1
2015/10/31-19:01:06, [IPAD-1000], 5, CHASSIS, INFO, Brocade5300, \
SW/0 Ether/0 IPv6 autoconf 2012::90/64 DHCP Off.
Type <CR> to continue, Q<CR> to stop:
2015/10/31-19:01:06, [IPAD-1001], 6, CHASSIS, INFO, Brocade5300, \
CP/0 IPv6 autoconf fe80::224:38ff:fea5:6200 DHCP not Set.
Type <CR> to continue, Q<CR> to stop:
2015/10/31-19:01:06, [IPAD-1000], 7, CHASSIS, INFO, Brocade5300, \
SW/0 Ether/0 IPv6 autoconf 2620:100:4:f801:205:33ff:fe00:9b28/64 tentative DHCP