Reference Guide

Brocade Fabric OS Command Reference 217
53-1004112-02
fabricLog
fabricLog
Displays (all users) or manipulates (admin) the fabric log.
Synopsis fabriclog -s | --show [dport]
fabriclog -c | --clear [dport]
fabriclog -d | --disable
fabriclog -e | --enable
fabriclog -h | --help
Description Use this command to display, clear, disable, or enable the fabric log. When used with the --show option, this
command displays the following information:
Time Stamp
Time of the event in the following format HH:MM:SS:MS.
Input and *Action
Fabric log message. An asterisk (*) in the message indicates an action. The link reset
information is indicated by LR_IN and LR_OUT. LR_IN indicates a link reset on the remote
switch, whereas LR_OUT indicates a link reset on the local switch.
S
Current switch state. Valid switch states include the following:
FO
Build Fabric (BF) received.
F1
Reconfigure Fabric (RCF) is not supported.
F2
Exchange Fabric Parameters (EFP) is waiting for last Accept Frame (ACC) from flood.
F3
Flood EFPs.
D0
The switch is the principal switch.
D1
The principal switch is sending Domain ID Assigned (DIA).
D2
The principal switch is waiting for Request Domain ID (RDI).
D3
The principle switch is processing the RDI.
A0
The switch is not the principal switch.