Reference Guide

Brocade Fabric OS Command Reference 219
53-1004112-02
fabricLog
Sn
Next switch state. Refer to switch states for valid states.
Pn
Next port state. Refer to port states for valid states.
Port
Port number, if applicable, or NA
Xid
OXID (Exchange ID) Port number, if applicable, or NA
Refer to the FC-SW-5 specification for more information on the port and switch states logged by this command.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
-s | --show [dport]
Displays the fabric log. Optionally displays the D_Port logs only.
-c | --clear [dport]
Clears the fabric log. Optionally clears the D_Port logs only.
-d | --disable
Disables the fabric log. By default, the fabric log is enabled.
-e | --enable
Enables the fabric log.
-h | --help
Displays the command usage.
Examples To display the fabric log:
switch:admin> fabriclog -s
Time Stamp Input and *Action S, P Sn,Pn Port Xid
===================================================================================
Switch 0; Thu Feb 23 06:55:59 2012 GMT (GMT+0:00)
06:55:59.661357 *Fss Init NA,NA NA,NA NA NA
06:55:59.661606 *Initiate State NA,NA F2,NA NA NA
06:55:59.963652 Expd1 0x00000000 0000ffff ffffffff ffffffff F2,NA F2,NA 0 NA
06:56:03.242214 Rcv FSS_RECOV_COLD F2,NA F2,NA NA NA
06:56:03.242264 D-port Offline Skip Cnt 1(inst = 1) F2,NA F2,NA NA NA
06:58:44.880675 SCN LR_PORT (0);g=0x22; LR_IN A2,P0 A2,P0 41 NA
07:00:12.107354 D-port Offline Skip Cnt 1(inst = 4) F2,NA F2,NA NA NA
07:00:12.640790 SCN LR_PORT (0);g=0x0; LR_OUT F2,P0 F2,P0 11 NA
07:00:12.772930 SCN Port Online;g=0x0; F2,P0 F2,P1 11 NA
(output truncated)