Reference Guide

Brocade Fabric OS Command Reference 227
53-1004112-02
fabricShow
Path Count
The number of currently available paths to the remote domain.
Version
The firmware version of the domain.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
-membership
Displays fabric membership information with additional details of the FC Router, if present
in the fabric.
-chassis
Displays information about the chassis including chassis WWN and chassis name.
-paths
Displays the number of paths available to each remote domain.
-version
Displays firmware version details for each domain.
-help
Displays the command usage.
Examples The following example illustrates a fabric of four switches. The switch named "sw180" is the Principal switch. Three
of the switches are configured to run IP over Fibre Channel. The fabric name is configured.
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
----------------------------------------------------------------------
64:fffc40 10:00:00:60:69:00:06:56 192.168.64.59 192.168.65.59 "sw5"
65:fffc41 10:00:00:60:69:00:02:0b 192.168.64.180 192.168.65.180>"sw180"
66:fffc42 10:00:00:60:69:00:05:91 192.168.64.60 192.168.65.60 "sw60"
67:fffc43 10:00:00:60:69:10:60:1f 192.168.64.187 0.0.0.0 "sw187"
The Fabric has 4 switches
Fabric Name: mainFabricA
To show a mixed fabric with IPv4- and IPv6-configured switches (the fabric name is not configured):
switch:admin> fabricshow
Switch ID Worldwide Name Enet IP Addr FC IP Addr Name
----------------------------------------------------------------------
1:fffc41 10:00:00:60:69:00:02:0b 192.168.64.180 192.168.65.180>"sw180"
1080::8:800:200C:1234/64
2:fffc42 10:00:00:60:69:00:05:91 192.168.64.60 192.168.65.60 "sw60"
The Fabric has 2 switches.