Manualshelf

Reference Guide

ManualsBrandsDell ManualsAccess PlatformsBrocade G620
251252253254255256257258259260
232 Brocade Fabric OS Command Reference
53-1004112-02
fanEnable
fanEnable
Enables a fan unit.
Synopsis fanenable unit
Description Use this command to set a previously disabled fan unit back to the default RPM speed.
Notes This command is not available on nonbladed systems.
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operand:
unit
Specify the fan unit number to enable.
Examples To enable a fan unit:
switch:admin> fanenable 1
Fan unit 1 has been enabled
SEE ALSO fanDisable, fanShow