Reference Guide

Brocade Fabric OS Command Reference 259
53-1004112-02
fcpProbeShow
fcpProbeShow
Displays the Fibre Channel Protocol (FCP) probe information.
Synopsis fcpprobeshow [slot/]port
Description Use this command to display the Fibre Channel Protocol daemon (FCPD) device probing information for the
devices attached to the specified F_Port or FL_Port. This information includes the number of successful logins
and SCSI INQUIRY commands sent over this port and a list of the attached devices.
This command includes probing information for NPIV devices. In addition, this command displays the list of
devices connected to a port and the number of successful PLOGI, PRLI, INQUIRies, and current probe state. For
F_Ports and NPIV ports, when the F_Port Device Update Mode is ON, the probed device details are updated in
the "npiv update map" field. When the F_Port Device Update Mode is OFF, the probed device details are updated
in the "update map" field. Use the configure command to configure the F_Port Device Update Mode.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
slot
For bladed systems only, specify the slot number of the port to display, followed by a slash
(/).
port
Specify the port number to display, relative to its slot for bladed systems. Use switchShow
to list valid ports. This operand is required.
Examples To display the FCP probe information:
switch:admin> fcpprobeshow 31
port 0 is FV-Port and it is online.
nodes probed: 3
successful PLOGIs: 3
successful PRLIs: 3
successful INQUIRies:3
successful LOGOs: 3
outstanding IUs: 0
probing state: 3
probing TOV: 0
probing count: 0
probing next: 0
pmap: 0x00000000, 0x00000000, 0x00000000, 0x00000000
update map: 0x40000000, 0x00000000, 0x00000000, 0x00000000
npiv pmap: 0x00000000 0x00000000 0x00000000 0x00000000 \
0x00000000 0x00000000 0x00000000 0x00000000
npiv update map: 0x00000006 0x00000000 0x00000000 0x00000000 \
0x00000000 0x00000000 0x00000000 0x00000000