Reference Guide

Brocade Fabric OS Command Reference 299
53-1004112-02
fcrXlateConfig
Notes
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Information displayed is not related to the entire backbone. The FC Router displays only connections to an edge
fabric for which there are translate domain IDs. Any changes you intend to make using this command should be
issued on the switches to which the edge fabrics are directly attached. In a Virtual Fabric environment, this is the
base switch.
Operands This command has the following operands:
fcrxlateconfig
Sets the preferred domain ID (1-239) to preferredDomainID for the translate phantom
domain and saves the configuration persistently. The translate domain must be inactive to
set the preferred domain ID. The following operands are required:
importedFID
Specifies the fabric ID (1 through 128) of the fabric that contains the translate domain.
exportedFID
Specifies the fabric ID (1 through 128) of the remote fabric represented by this translate
domain.
preferredDomainID
Specifies the preferred domain ID (1 through 239) of the translate phantom domain.
--remove | -r
Removes the preferred domain ID of the translate phantom domain. The translate domain
must be inactive to remove the preferred domain ID. The following operands are required:
importedFID
Specifies the fabric ID (1 through 128) of the fabric that contains the translate domain.
exportedFID
Specifies the fabric ID (1 through 128) of the remote fabric represented by this translate
domain.
preferredDomainID
Specifies the preferred domain ID (1 through 239) of the translate phantom.
--enable persistxd
Enables translate domain persistence. When persistxd is enabled, the translate domain is
created based on the persistent translate domain ID configuration. If a valid persistent
translate domain ID is configured for a given importedFID and exportedFID pair, a translate
domain for the exportedFID is created, even if no devices need to be imported or exported
across the edge fabrics represented by importedFID and exportedFID. By default, persistxd
is enabled.
--disable persistxd
Disables translate domain persistence. When persistxd is disabled, the translate domain is
not created, even if a valid persistent translate domain ID is configured for the importedFID
and exportedFID pair, so long as no devices are imported or exported across the edge
fabrics represented by importedFID and exportedFID. Once devices need to be imported or
exported across the edge fabrics, the translate domain is created.