Reference Guide

302 Brocade Fabric OS Command Reference

53-1004112-02

fddCfg

Manages the fabric data distribution configuration parameters.

Synopsis fddcfg --showall

fddcfg --localaccept policy_list

fddcfg --localreject policy_list

fddcfg --fabwideset policy_list

Description Use this command to manage the fabric data distribution configuration parameters. These parameters control the

fabric-wide consistency policy.

Switches can be locally configured to allow or reject a security policy. Supported policies include the following:

SCC

Switch Connection Control policy

DCC

Device Connection Control policy

SCC

Switch Connection Control policy

PWD

Password policy

FCS

Fabric Configuration Server policy

PWD

Fabric Element Authentication policy

IPFILTER

IP Filter policy

Automatic distribution of a fabric-wide consistency policy is limited to SCC, DCC, and FCS policies. Use the

--fabwideset parameter to enforce these policies fabric-wide in tolerant or strict mode, In strict mode, fabric-wide

enforcement of FCS consistency policy is possible in mixed fabrics. However, switches that do not support the

policies ignore them.

Notes When a policy is set to strict mode, the manual distribution of the policy is not allowed.

The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands This command has the following operands:

--showall

Displays the accept/reject configuration of all policy sets and the fabric-wide consistency

policy on the switch.