Reference Guide

Brocade Fabric OS Command Reference 303
53-1004112-02
fddCfg
--localaccept policy_list
Configures the switch to accept distributions of the specified policies. The policies in
policy_list must be separated by semicolons and enclosed in quotation marks; for example,
"SCC;DCC;FCS".
--localreject policy_list
Configures the switch to reject distributions of the specified policies in policy_list. However,
a database cannot be rejected if it is specified in the fabric-wide consistency policy. The
policies in policy_list must be separated by semicolons and enclosed in quotation marks; for
example, "SCC;DCC".
--fabwideset policy_list
Sets the fabric-wide consistency policy. A database that is set to reject distributions cannot
be specified in the fabric-wide consistency policy. To set the fabric-wide consistency policy
as strict, use the strictness indicator "S". To set the fabric-wide consistency policy as
tolerant, omit the "S". A valid policy set should be of the form "SCC:S;DCC;FCS". To set the
fabric-wide policy to NULL (default) or no fabric-wide consistency, use the policy Set "".
Supported policies are Switch Connection Control (SCC), Device Connection Control (DCC),
and Fabric Configuration Server (FCS). All members specified in a given policy set are
automatically distributed to all participating switches in the fabric that support the policy.
Refer to the DESCRIPTION section for specific exceptions. In the presence of a fabric-wide
FCS consistency policy, this command can only be run from the primary FCS switch.
Examples To display the fabric-wide consistency policy and the accept/reject configuration for all databases:
switch:admin> fddcfg --showall
Local Switch Configuration for all Databases:-
DATABASE - Accept/Reject
-------------------------
SCC - accept
DCC - accept
PWD - accept
FCS - accept
AUTH - accept
IPFILTER - accept
Fabric Wide Consistency Policy:- "SCC:S;DCC;FCS"
To configure the switch to accept distribution of the SCC policy set and PWD database:
switch:admin> fddcfg --localaccept "SCC;PWD"
Local Switch Configured to accept policies.
To configure this switch to reject distribution of SCC and DCC policy sets:
switch:admin> fddcfg --localreject "SCC;DCC"
Local Switch Configured to reject policies.
To set the fabric-wide consistency policy to "strict" for SCC and "tolerant" for DCC and FCS:
switch:admin> fddcfg --fabwideset "SCC:S;DCC;FCS"
SEE ALSO distribute