Reference Guide

316 Brocade Fabric OS Command Reference
53-1004112-02
ficonCupShow
ficonCupShow
Displays FICON-CUP parameters for a switch.
Synopsis ficoncupshow fmsmode
ficoncupshow modereg [bitname]
ficoncupshow MIHPTO
ficoncupshow DD_LOG
ficoncupshow diag_info
ficoncupshow hlthchk_log
ficoncupshow LP
Description Use this command to display FICON-CUP (Control Unit Port) parameters for a switch.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
fmsmode
Display the FICON Management Server (FMS) mode for the switch.
modereg
Display the FICON-CUP mode register. If no operand is specified, all mode register bit
settings are displayed. If a mode register bit name is specified, then only the value of that bit
is displayed. A value of 1 indicates that a given mode register bit is set, and 0 indicates that it
is not set.
The following operand is optional:
bitname
Displays the specified mode register bit as either set (1) or not set (0). Valid values for
bitname include the following:
POSC
Programmed offline state control
UAM
User alert mode
ASM
Active=saved mode
DCAM
Director clock alert mode
ACP
Alternate control prohibited