Reference Guide
Brocade Fabric OS Command Reference 317
53-1004112-02
ficonCupShow
HCP
Host control prohibited
MIHPTO
Displays the FICON-CUP missing interrupt handler primary timeout (MIHPTO) value in
seconds.
DD_LOG
Displays the latest Director Diagnostics Log.
diag_info
Displays dignostic information for the logical switch such as whether Diagnostic Interval has
been set for CUP Diagnostics (if so, then Statistics Sampling is running), along with
additional information about Statistics Sampling by the CUP, the detected CUP Diagnostic
capabilities and settings for other switches in the fabric..
hlthchk_log
Displays the HealthCheck Logs for the logical switch. It displays Sense Data returned to the
FICON host for Asynchronous Error Reporting events generated by the CUP for
Congestion, Latency, or Port Fencing events which have been detected by the switch.
LP
Displays the logical paths on the switch. For each entry, the command displays the port
identifier (PID), the LPAR identifier (CHID), reporting state (operational or reset
(=nonoperational)), and reporting path state (current, primary, or alternate).
Examples To display the FMS mode for the switch:
switch:user> ficoncupshow fmsmode
fmsmode for the switch: Enabled
To display the mode register for the switch:
switch:user> ficoncupshow modereg
POSC UAM ASM DCAM ACP HCP
------------------------------
1 0 1 1 1 0
To display the ASM bit in the mode register for the switch:
switch:user> ficoncupshow modereg ASM
ASM
---
1
To display the MIHPTO value for the CUP:
switch:user> ficoncupshow MIHPTO
MIHPTO for the CUP: 60 seconds