Reference Guide

320 Brocade Fabric OS Command Reference
53-1004112-02
ficonShow
ficonShow
Displays the contents of the specified FICON database.
Synopsis ficonshow database [fabric | table | port port_index]
Description Use this command to display the contents of a FICON database. The ficonShow database operand is the name of
the database to display. If the fabric operand is absent, the command displays the members of the named
database that are local to the switch on which the command was issued. If the fabric operand is present, it must be
entered exactly as shown, and this specifies that all members are displayed, both local and remote.
The following information may be displayed, depending on which database you enter and which operands you use
with the command:
Domain
Displays the domain ID.
Fabric WWN
Displays the fabric WWN.
Flag
Indicates if the node is valid, not valid, or not current. Flag values are as follows:
0x00
Indicates the node ID of the storage port is valid.
0x10
Indicates the node ID of the channel port is valid.
0x20
Indicates the node ID of the storage port is not current.
0x30
Indicates the node ID of the channel port is not current.
0x40
Indicates the node ID of the storage port for the RNID switch for RLIR is not valid.
0x50
Indicates the node ID of the channel port is not valid.
Fmt
Displays the record-registration format.
FRU Failure Description
Indicates the FRU failure type as one of the following:
WWN card [unit number]
The WWN card
Power Supply [unit number]
The Power Supply card
Hardware Slot [unit number]
The Hardware Slot