Reference Guide

Brocade Fabric OS Command Reference 325
53-1004112-02
ficonShow
LIRR
Devices registered to receive link incident reports. Entries can have the following flags:
-C*
A user-configured LIRR entry defined as current (set with the ficonCfg command).
-C
A LIRR entry defined by the management server demon as current based on order.
-S
A LIRR entry defined by the management server demon as secondary.
SwitchRNID
Switch node identification.
RLIR
Link incident reports.
ILIR
Implicit link incident reports.
fabric
Displays FICON database information for the entire fabric. This operand is optional; if
omitted, only local members of the named database are displayed.
table
Displays RNID data in table format.
port
Displays RNID data for the specified port.
port_index
Specifies the port index number in decimal or the area field (middle byte) of the Fibre
Channel Address (PID) in hexadecimal format.
Examples To display the local RNID database:
switch:admin> ficonshow RNID
{
{Fmt Type PID Registered Port WWN Registered Node WWN \
0x18 N 502b00 50:05:07:64:01:00:15:8d 50:05:07:64:00:c1:69:ca \
flag Parm
0x10 0x200110
Type number: 002064
Model number: 101
Manufacturer: IBM
Plant of Manufacture: 02
Sequence Number: 0000000169CA
tag: 102b
}
{Fmt Type PID Registered Port WWN Registered Node WWN \
0x18 N 502e00 50:05:07:64:01:40:0f:ca 50:05:07:64:00:c1:69:ca \
flag Parm
0x10 0x200105
Type number: 002064
Model number: 101
Manufacturer: IBM