Reference Guide

Brocade Fabric OS Command Reference 395

53-1004112-02

haReboot

Performs high availability (HA) reboot.

Synopsis hareboot

Description Use this command to perform warm reboot in the switch-based systems. On chassis-based systems, this

command behaves similar to the haFailover command so that the standby CP becomes the active CP.

In chassis-based systems, if the active and standby CPs are not synchronized or the system is not in the redundant

mode, the command aborts.

When the switch-based system is not fully up or stable, the haReboot command cannot be completed.

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands None

Examples To perform Ha reboot in the switch-based systems:

switch:admin> hareboot

HA Rebooting ...

To perform Ha reboot in the chassis-based systems:

switch:admin> hareboot

Restarting system with command 'Machine Rebooting