Reference Guide

Brocade Fabric OS Command Reference 399
53-1004112-02
haShow
Notes
This command may not be supported on nonbladed systems.
Slot numbers for CP1 and CP0 vary depending on the hardware platform. On the Brocade DCX 8510-8, CP0 is in
slot 6 and CP1 is in slot 7. On the Brocade DCX 8510-4, CP0 is in slot 4 and CP1 is in slot 5. On the Brocade X6
Director, CP0 is in slot 1 and CP1 is in slot 2.
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands None
Examples To display CP status on a Brocade DCX 8510-8 with a healthy standby CP:
switch:admin> hashow
Local CP (Slot 7, CP1) : Active, Warm Recovered
Remote CP (Slot 6, CP0) : Standby, Healthy
HA Enabled, Heartbeat Up, HA State Synchronized
To display CP status on a Brocade X6 Director with a healthy standby CP:
switch:admin> hashow
Local CP (Slot 1, CP0): Active, Cold Recovered
Remote CP (Slot 2, CP1): Standby, Healthy
HA enabled, Heartbeat Up, HA State synchronized
SEE ALSO haDisable, haEnable, haFailover