Reference Guide

Brocade Fabric OS Command Reference 415
53-1004112-02
interfaceShow
firstHlo
Time of the first hello sent on this interface.
nbstFull
Time of the last finishing state, NB_ST_FULL, on this interface.
&dbRetransList
Pointer to the database retransmission list.
&lsrRetransList
Pointer to the link state records (LSR) retransmission list.
&lsrAckList
Pointer to the link state acknowledgements (LSA) retransmission list.
inactTID
Inactivity timer ID.
helloTID
Hello timer ID.
dbRtxTID
Database retransmission timer ID.
lsrRtxTID
LSR retransmission timer ID.
inactTo
Inactivity timeout value, in milliseconds. When this timeout expires, the adjacency with the
neighbor switch is broken and new paths are computed to all possible destination switches
in the fabric.
helloTo
Hello timeout value, in milliseconds. When this timeout expires, a Hello frame is sent to the
neighbor switch through this port.
rXmitTo
Retransmission timeout value, in milliseconds. It is used to transmit topology information to
the neighbor switch. If no acknowledgement is received within this value, the frame is
retransmitted.
nCmdAcc
Total number of commands accepted from the neighbor switch. Number includes Hellos,
Link State Updates (LSUs), and LSAs.
nInvCmd
Number of invalid commands received from the neighbor switch. Usually commands with
an FSPF version number higher than the one running on the local switch.
nHloIn
Number of Hello frames received from the neighbor switch.
nInvHlo
Number of invalid Hello frames (Hello frames with invalid parameters) received from the
neighbor switch.