Reference Guide

Brocade Fabric OS Command Reference 417
53-1004112-02
interfaceShow
DECOM_SEND (8)
Preparing to update routes of the local port; negotiates for the necessary before updating
the routes.
DECOM_TIMER (9)
The request for one or more locks failed; delay for a short interval before retrying.
DECOM_DONE (10)
The local routes are updated; waiting for acknowledgement from the neighbor.
DECOM_BLOCK (11)
The local routes are updated; the neighbor sent acknowledgement.
chassis_lock
Internal variable
lock_request
Internal variable
nbr_lock_lock
Internal variable
r_rdy_rcvd
Indicates if the neighbor has reported as ready to receive frames.
nbr r_rdy flags
Internal flags reported by the neighbor.
lock_busy_cnt
Number of times a lock has reported as busy.
decom_active
Indicates if a decommissioning request is active on the port.
decom_initiator
Indicates if the local port is the decommissioning request initiator.
decom_active_port
Indicates the port for which the decommissioning request is active.
decom_trunk_member
Indicates if decommissioning request is for a multi-link trunk.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
slot
For bladed systems only, specify the slot number of the port to be displayed, followed by a
slash (/).
port
Specify the number of the port to be displayed, relative to its slot for bladed systems. Use
switchShow for a list of valid ports. This operand is optional; if omitted, the interface
information for all ports is displayed.