Reference Guide

468 Brocade Fabric OS Command Reference
53-1004112-02
lfCfg
Switch WWN
The logical switch world wide name.
When issued with the -lisl option, the command displays the following information:
FID
Fabric ID of the logical switch.
Port
Number of the logical LISL port.
remote-domain
Domain ID of the base switch in the remote chassis.
Name
Switch name.
State
Port state: Online or Offline.
Associated physical ports
Physical ports associated with the LISL ports.
When lfCfg is issued within a logical switch context, only the configuration regarding that switch and the fabrics
reachable from that switch is displayed. When the command is issued in a chassis context the information for all
chassis in the base fabric reachable from the current chassis is displayed. Executing chassis-level commands
requires chassis permissions. Refer to the userConfig command for information on setting chassis user
permissions.
Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
This command is supported only on hardware platforms that are Virtual Fabric-aware and run Fabric OS v6.2.0 or
later. Refer to the Fabric OS Administrator's Guide for specific hardware support.
You cannot use the portEnable command on logical ports. Use lfcfg with the --lislenable option to re-enable
disabled LISL ports on a logical switch.
Operands This command has the following operands:
--show -cfg
Displays information for the fabric ID set by the context in all chassis reachable from the
base fabric.
--showall -cfg
Displays information for all fabrics in all chassis reachable from the chassis context in which
the command is executed. This option requires chassis permissions.
--show -lisl
Displays status information about the LISLs in the logical switch set by the context.
--showall -lisl
Displays status information of all LISLs in the chassis. This option requires chassis
permissions.