Reference Guide

Brocade Fabric OS Command Reference 473

53-1004112-02

licenseIdShow

Displays the system license ID.

Synopsis licenseidshow

Description Use this command to display the license ID of the system.

Some features of the switch and the fabric are optional, licensed products. Without a license installed for such

products, the services provided by these features are not available.

This command displays the system license ID used for generating and validating licenses on the system. The

license ID format consists of eight pairs of hexadecimal values, separated by colons. Each hexadecimal value is

between 00 (0) and FF (255).

Notes While the format of this identifier might be similar or even identical to other identifiers in the system, no inferences

should be made about the relationships between them as they are subject to change independently of one another.

The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands None

Examples To display the license ID:

switch:admin> licenseidshow

a4:f8:69:33:22:00:ea:18

SEE ALSO licenseAdd, licensePort, licenseRemove, licenseShow, licenseSlotCfg