Reference Guide

506 Brocade Fabric OS Command Reference
53-1004112-02
lsDbShow
rem port
Port number of the port on the other side of the link.
cost
Cost of this link. The default cost for a 1 Gbps link is 1,000.
bw
The rounded bandwidth of the output link, in Gbps.
type
Always 1.
Notes Beginning Fabric OS v7.3.0, the output displays only the lines with a bit set. If a port bitmap does not have any bits
set, the output displays as "None" for the first line of the bitmap.
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operand:
domain
Specifies the domain ID of the LSR to be displayed. This operand is optional; if omitted, the
entire link state database is displayed.
Examples To display the link state record for a switch:
switch:admin> lsdbshow 1
Domain = 1 (self), Link State Database Entry pointer = 0x1096da60
lsrP = 0x109784b0
earlyAccLSRs = 0
ignoredLSRs = 0
lastIgnored = Never
installTime = Aug 26 18:20:41.451
lseFlags = 0xa
uAllOutIfsP[4] = 0x00000001
uPathCost = 0
uOldHopCount = 0
uHopsFromRoot = 0
uPathCount = 1
mOutIfsP[0] = 0x10000000
parent = 0xf0
mPathCost = 0
mHopsFromRoot = 0
Link State Record:
Link State Record pointer = 0x109784b0
lsAge = 321
reserved = 0
type = 1
options = 0x0
lsId = 1
advertiser = 1
incarn = 0x80000185