Reference Guide

508 Brocade Fabric OS Command Reference
53-1004112-02
mapsConfig
mapsConfig
Sets MAPS configurations.
Synopsis mapsconfig --config pause -type member_type
-members member_list
mapsconfig --config continue -type member_type
-members member_list
mapsconfig --actions actions_list
mapsconfig --emailcfg -address email_address
mapsconfig --testmail [-subject subject] [-message msg]
mapsconfig --import flow_name [-force]
mapsconfig --deimport flow_name [-force]
mapsconfig --purge
mapsconfig --show
mapsconfig --help
Description Use this command to perform the following Monitoring and Alerting Policy Suite (MAPS) functions:
• Pause or continue monitoring specific elements.
• Define the list of allowable actions that can be taken on the switch when a threshold is triggered.
• Configure e-mail address to which the alerts must be delivered.
• Import a flow.
• Remove the imported flow from MAPS configuration.
• Delete all user-defined MAPS configurations related to rules, groups, policies, and so on.
• Display MAPS settings.
Notes This command requires a Fabric Vision license.
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands This command has the following operands:
--config pause
Stops monitoring specific elements. The active policy is still in effect.
--config continue
Resumes monitoring specific elements on which monitoring was previously paused.