Reference Guide

Brocade Fabric OS Command Reference 521
53-1004112-02
mapsPolicy
--enable
Activates a policy on the switch. The dashboard data will be cleared after the policy is
activated.
policy_name
Specifies the name of the policy to be enabled. The name can be a predefined or a
user-defined policy. If another policy is already enabled, that policy is disabled and the
specified policy is enabled instead. The predefined policies are as follows:
dflt_conservative_policy
Contains rules with more lenient thresholds that allow a buffer and do not immediately
trigger actions. Use this policy in environments where the elements are resilient and can
accommodate errors.
dflt_aggressive_policy
Contains rules with very strict thresholds. Use this policy if you need a pristine fabric
(for example, FICON fabrics).
dflt_moderate_policy
Contains rules with thresholds values between the aggressive and conservative
policies.
dflt_base_policy
Contains rules based on the features which can be monitored without a license.
--clone
Creates a replica of an existing predefined or user-defined policy. The new policy has all of
the rules of the existing policy. You can further modify the newly created policy. The
following operands are required:
existing_policy_name
Specifies the name of an existing policy. The policy can be a predefined policy or a
user-defined policy.
-name new_policy_name
Specifies the name of the policy to be created.
--delete
Deletes a user-defined policy.
policy_name
Specifies the name of the user-defined policy to be deleted. You cannot delete the
predefined policies.
--show
Displays the rules in a policy.
policy_name
Specifies the name of the policy to display. The name can be a predefined or a user-defined
policy.
-summary
Displays all existing policies and the number of rules present in them.
-all
Displays the rules in all of the policies.