Reference Guide

Brocade Fabric OS Command Reference 523
53-1004112-02
mapsPolicy
To display the details of a policy:
switch:admin> mapspolicy --show dflt_base_policy -concise
Policy Name: dflt_base_policy
Rule Name |Condition |Actions
|
------------------------------------------------------------------------------------
------------
defALL_TSTEMP_OUT_OF_RANGE |ALL_TS(TEMP/NONE==OUT_OF_RANGE)
|RS,SN,EML |
defCHASSISFLASH_USAGE_90 |CHASSIS(FLASH_USAGE/NONE>=90)
|RS,SN,EML |
defCHASSISMEMORY_USAGE_75 |CHASSIS(MEMORY_USAGE/NONE>=75)
|RS,SN,EML |
defCHASSISCPU_80 |CHASSIS(CPU/NONE>=80)
|RS,SN,EML |
defCHASSISBAD_TEMP_MARG |CHASSIS(BAD_TEMP/NONE>=1)
|SWM,SN,EML |
defCHASSISBAD_TEMP_CRIT |CHASSIS(BAD_TEMP/NONE>=2)
|SWD,SN,EML |
defCHASSISBAD_PWR_CRIT |CHASSIS(BAD_PWR/NONE>=2)
|SWD,SN,EML |
defCHASSISBAD_FAN_MARG |CHASSIS(BAD_FAN/NONE>=1)
|SWM,SN,EML |
defCHASSISBAD_FAN_CRIT |CHASSIS(BAD_FAN/NONE>=2)
|SWD,SN,EML |
defALL_PSPS_STATE_FAULTY |ALL_PS(PS_STATE/NONE==FAULTY)
|RS,SN,EML |
defALL_PSPS_STATE_ON |ALL_PS(PS_STATE/NONE==ON)
|RS,SN,EML |
defALL_PSPS_STATE_OUT |ALL_PS(PS_STATE/NONE==OUT)
|RS,SN,EML |
defALL_FANFAN_STATE_FAULTY |ALL_FAN(FAN_STATE/NONE==FAULTY)
|RS,SN,EML |
defALL_FANFAN_STATE_ON |ALL_FAN(FAN_STATE/NONE==ON)
|RS,SN,EML |
defALL_FANFAN_STATE_OUT |ALL_FAN(FAN_STATE/NONE==OUT)
|RS,SN,EML |
*defALL_PORTSSFP_STATE_FAULTY |ALL_PORTS(SFP_STATE/NONE==FAULTY)
|RS,SN,EML |
*defALL_PORTSSFP_STATE_OUT |ALL_PORTS(SFP_STATE/NONE==OUT)
|RS,SN,EML |
*defALL_PORTSSFP_STATE_IN |ALL_PORTS(SFP_STATE/NONE==IN)
|RS,SN,EML |
defCHASSISETH_MGMT_PORT_STATE_DOWN |CHASSIS(ETH_MGMT_PORT_STATE/NONE==DOWN)
|RS,SN,EML |
defCHASSISETH_MGMT_PORT_STATE_UP |CHASSIS(ETH_MGMT_PORT_STATE/NONE==UP)
|RS,SN,EML |
Active Policy is 'dflt_base_policy'.
Unmonitored Rules are prefixed with "*"
Legends:
RS: RASLOG SN: SNMP EML: EMAIL PF: FENCE PL: PORTLOG PD: DECOM FMS: FMS PT: TOGGLE
SDDQ: SDDQ SWD: SW_CRITICAL
SEE ALSO logicalGroup, mapsConfig, mapsDb, mapsRule, mapsSam