Reference Guide

Brocade Fabric OS Command Reference 533
53-1004112-02
mapsRule
sddq
Isolates the slow-drain flows to a low priority VC from the existing VC (medium or high) thus
freeing up the resources for the regular flows in the existing VC. The slow drain device
quarantine (SDDQ) feature is not supported in the Access Gateway mode.
fms
Notifies the configured MAPS threshold events to the FICON Management Server (FMS).
toggle
Enables port toggling to recover a port from bottleneck condition caused by the target
device. Port toggle is supported only for the F_Ports.
none
No actions are allowed on the switch. Specifying this option allows you to turn off all
notifications.
--create rule_name
Creates a monitoring rule and adds it to a specified policy. All the following operands are
required:
-group group_name
Specifies the group containing the elements on which the specified condition is to be
evaluated.
-monitor ms_name
Specifies the monitoring system (MS).
-timebase time_base
Specifies the time interval between two samples to be compared.
-op comparison_operator
Specifies the relational operation to be used in evaluating the condition.
-value value
Specifies the threshold value.
-action action
Specifies a comma-separated list of actions to be taken if the specified condition is
evaluated to be true.
-tt timeout
Specifies the time window in seconds over which the port is disabled and re-enabled by
MAPS to recover from bottleneck condition. The valid range is from 2 to 3600 seconds.
This parameter is valid with only the toggle alert option.
-qt quiet_time [-unit min | hour | day]
Specifies the time interval, in units of minutes, hours, or days, between consecutive alerts.
This parameter is valid with only the raslog and email alert options.
-qtclear
Clears the configured quiet time for the RASLog and e-mail alerts.
-policy policy
Specifies the user-defined policy to which the rule is to be added. You cannot add a rule to
a predefined policy.