Reference Guide

550 Brocade Fabric OS Command Reference
53-1004112-02
msTdEnable
msTdEnable
Enables the Management Server (MS) topology discovery service.
Synopsis mstdenable ["ALL"]
Description Use this command to enable the MS topology discovery service on the local switch or throughout the fabric. The
change takes effect immediately and commits to the configuration database for all affected switches. The change
is persistent across power cycles and reboots.
Notes Topology Discovery Management requires the attached devices (including attached switches) to support request
node identification data (RNID) extended link service (ELS).
When an FCS policy is enabled, and this command is issued with the "ALL" operand, it can be issued only from the
primary FCS.
The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric
OS Commands" and "Command Availability" for details.
Operands The following operand is optional:
"ALL"
Enables the MS topology discovery service throughout the fabric. This operand must be
enclosed in double quotation marks.
Examples To enable the MS topology discovery service on the local switch:
switch:admin> mstdenable
Request to enable MS Topology Discovery Service
in progress....
done.
*MS Topology Discovery enabled locally.
To enable MS topology discovery on all switches in the fabric:
switch:admin> mstdenable "ALL"
Request to enable MS Topology Discovery Service
in progress....
done.
*MS Topology Discovery enabled locally.
*MS Topology Discovery Enable Operation Complete!!
SEE ALSO msTdDisable, msTdReadConfig