Reference Guide

552 Brocade Fabric OS Command Reference

53-1004112-02

myId

Displays the current login session details.

Synopsis myid

Description Use this command to display the status of the system and the login session details. This includes IPv4 or IPv6

addresses associated with the login session.

The login session gives details of the following:

• CP/switch (or console/serial port) used to log in.

• The IP address of the current login session for Telnet or the name of the current console port or the serial port

(if modem login used).

• The current CP mode (Active, Standby, or N/A).

• The current system status (Redundant, Nonredundant, or N/A).

Notes The execution of this command is subject to Virtual Fabric restrictions that may be in place. Refer to "Using Fabric

OS Commands" and "Command Availability" for details.

Operands None

Examples To display current login information:

switch:admin> myid

Current Switch: switch

Session Detail: switch (123.123.123.123) Active Redundant

switch:admin> myid

Current Switch: sw0

Session Detail: sw0 (123.123.123.123) N/A HA-Status-N/A